TC-BURRS SET MX NCC 6/5-6
NEW PFERD-COMBICUT tungsten carbide burrs with the cut MX NCC were designed especially for general use. They have a good stock removal rate when used on various different materials.
The 6/5-6 MX NCC set contains the five most common shapes with a burr diameter of 6 mm in the general MX NCC cut. The robust round plastic box with screw-on top protects the tools from dirt and damage.
Advantages
- Good stock removal rate and tool life.
- Cost-effective stock removal when used on a wide variety of materials.
- The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
- Use the highest rotational speeds possible. In this respect, please observe our recommended rotational speeds/cutting speeds.
- The contact area between the burr and the workpiece must not exceed 30 % of the total burr surface.
Materials that can be worked
Bronze, Case-hardened steels, Cast iron, Cast steel, Cobalt-based alloys, Fibre-reinforced, thermo setting plastics (GRP, CRP) Fibre-reinforced, thermo setting plastics (GRP, CRP) with a fibre content > 40 %Fibre-reinforced, thermo setting plastics (GRP, CRP) with a fibre content ≤ 40 %Grey/nodular cast iron (GG/GJL, GGG/GJS)Hard aluminium, alloys, Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)Hard non-ferrous metal, Hardwood, High-temperature-resistant materials , Nickel-based alloys (e.g. Inconell and Hastelloy) Other, Other non-ferrous metals ,Plastics, Stainless steel (INOX) Steel, Steel, cast steel, Steel materials with a hardness > 54 HRC Steels over 700 N/mm² (> 220 HB)Steels up to 1,200 N/mm² (< 38 HRC)Steels up to 700 N/mm² (< 220 HB) Thermo,plastics, Titanium, Titanium alloys, Tool steels, White annealed cast iron (GTW, GJMW)Wood
Applications
Cutting out holes, Deburring, Milling, Working on edges, Work on weld seams
Drive types
Flexible shaft drive, Robot, Straight grinder
